Surfaces and finishes
Chrome (.000)
Time tested polished Chrome is the hardiest of all finishes. To protect the polished surface against corrosion the first step in the electroplating process is a layer of nickel. After that a layer of chrome is applied. Use Simichrome to clean the finish and Flitz Wax to protect the finish from spotting.
Bronze (.011)
Refined patina is turning every single object unique. Jörger’s patinated bronze is characterised by a particularly warm gloss and very special luxurious aesthetics resulting from the bronzing method: A special bath in acidic liquid initially stains the surface a dark brown. Hand-brushing produces the characteristic bronze shade, though the manual processing means that it cannot ever be consistent. The surface will always show some colour variations that make every object unique. Silk-gloss powder coat is applied and baked in the kiln in the last step. This final coating gives the surface protection and durability, producing the warm, velvety feel and look of the patinated bronze. Use gentle soap and water for cleaning – never use any abrasives or scouring agents. It is recommended to always dab products with this surface dry after use in order to prevent the formation of stains.
Gold (.020)
On top of the basic layer of Nickel a 24 karat Gold plating is applied. The world still considers Gold to be the most luxurious of all finishes. Due to the properties of Gold being malleable, clean with soft soap and water, and avoid rubbing the surface with anything other than a soft cloth. Lightly apply a spray on wax and avoid buffing. Pat the wax off rather than rub the surface.
Gold matt (.021)
Gold matt is a galvanised surface, the finish resulting from 23-carat gold plating applied to a nickel base layer. The alloy components harden the surface with a yellow tint that is stronger than the one found in fine gold. The surface is then hand-brushed before electroplating with gold for a “living” finish, giving it its precious matte shade. It is best to clean this surface with neutral liquid soap and water. Use only a soft cloth and pat the surface dry rather than rubbing it. This is a living finish with no warranty.
Rose gold (.022)
Rose gold is a particularly noble variety of rose gold. To protect against corrosion, a galvanic nickel layer of 12 µm is first applied here and then galvanized with an alloy of 18 carat gold and copper. The special value of the material lies in its higher proportion of pure gold and a lower proportion of copper compared to rose gold.
The thickness of the layer and the utmost care taken during the process determine the degree of durability of the coating as well as its decorative and anti-corrosion properties.
An additional layer of clear lacquer protects the sensitive rose gold surfaces from small scratches, external damage and abrasion and, above all, prevents discoloration from oxidation. Use soft soap and water for cleaning - never abrasive substances. It is recommended that the surface of the product be wiped dry after use to avoid stains.
Rose gold matt (.023)
Rose gold matt is a very noble variety of red gold. To protect against corrosion, a galvanic nickel layer of 12 µm is applied first and then galvanized with an alloy of 18 carat gold and copper. Rose gold matt, however, is brushed by hand, thereby lending the surface its precious, matt tone.
It also receives an additional clear lacquer layer, which protects the sensitive surface from small scratches, external damage and abrasion and, above all, prevents discoloration through oxidation.
Use soft soap and water for cleaning - never abrasive substances. It is recommended that the surface of the product be wiped dry after use to avoid stains.
Antique gold (.025)
After Gold plating, an additional process is applied with silver ingredients that let the product turn completely bluish. It is then polished by hand. After polishing, the blue colour only remains in the deeper recesses of the product. Due to the properties of Gold being malleable, clean with soft soap and water and avoid rubbing the surface with anything other than a soft cloth. Lightly apply a spray on wax and avoid buffing. Pat the wax off rather than rub the surface. This is a living finish with no warranty and only available for the collection APHRODITE and CRONOS.
Polished nickel (.035)
Polished nickel has a very pleasant effect due to its warm mirror reflections and is ideal as a finish for the bathroom. Whether classic and elegant or modern and minimalist – both design styles are creatively and effectively supported by the silver nickel surface. The nickel coating, which is about twice as sick, serves not only as an excellent corrosion layer, but also supports a long service life. As nickel tarnishes, it is recommended to wipe and clean it regularly to maintain its shine. It is recommended to pat the surface dry after use to avoid hard water stains. It can be cleaned with liquid soap and water or a 50/50 solution of water and light vinegar. Do not let the vinegar solution soak in, but rinse with sufficient water - furthermore, do not allow the product to soak in a vinegar solution. Stubborn dirt can be removed with the Simichrome polish. In addition, a wax will protect the surface against staining.
Satin nickel (.036)
The manufacturing process is basically the same as for the polished nickel surface. However, satin nickel is brushed by hand (and not polished) so that the surface gets its precious, matt tone. Clean this surface with neutral soap and water. Use only a soft cloth for this. Wax - lightly sprayed on but not rubbed in - protects the surface. Pat the surface dry rather than rubbing.
Sunshine (.040)
On top of the basic layer of Nickel a 18 carat Gold plating follows. Included in the Gold alloy is “Indium“. Indium gives the surface more stability and hardness in comparison to Gold. Clean with soft soap and water and avoid rubbing the surface with anything other than a soft cloth. Lightly apply a spray on wax and avoid buffing. Pat the wax off rather than shine the surface. This is a living finish with no warranty.
Sunshine matt (.041)
The same procedure as Sunshine finish, but the surface is then brushed to give it a sumptuous matt look. Clean with soft soap and water and avoid rubbing the surface with anything other than a soft cloth. Lightly apply a spray on wax and avoid buffing. Pat the wax off rather than shine the surface. This is a living finish with no warranty.
Matt white (.052)
Matt white is a very high-quality powder coating by which the taps and accessories are cleaned and pre-treated in order to then apply the powder to the electrically conductive surface. The powder is then burned into the surface at temperatures of up to 250° C. The heat causes the structures of the paint powder and the surface to cross-link, resulting in a resistant, durable and very attractive coating that also has protective properties. Use soft soap and water for cleaning - never abrasive substances. It is recommended that the surface of the product be wiped dry after use to avoid stains.
Platinum (.065)
The colour of Platinum is very similar to Polished Nickel. Nickel is applied first, but because Nickel is not a permanent finish, we cover the surface with Platinum. Platinum is very exclusive and more expensive than gold. Platinum is very resistant to corrosion and shows high abrasion resistance. Clean with Simichrome and wax the surface with Flitz Wax to avoid spotting.
Platinum matt (.066)
The same procedure used to create Platinum is used to create Platinum Matt, but brushed by hand to achieve the matt finish. Because of this hand prepared process, each item is unique. Clean with soft soap and water and avoid rubbing the surface with anything other than a soft cloth. Lightly apply a spray on wax and avoid buffing. Pat the wax off rather than shine the surface.
Matt black (.092)
Matt black is a very high-quality powder coating by which the taps and accessories are cleaned and pre-treated in order to then apply the powder to the electrically conductive surface. The powder is then burned into the surface at temperatures of up to 250° C. The heat causes the structures of the paint powder and the surface to cross-link, which resulting in a resistant, durable and very attractive coating that also has protective properties. Use soft soap and water for cleaning - never abrasive substances. It is recommended that the surface of the product be wiped dry after use to avoid stains.
Mink (.095)
Mink is an electroplated surface, which makes the product appear in an elegant anthracite. Just as hard as chrome, it is comparably resistant to chemical cleaning agents and equally resistant to tarnishing. To protect the polished surface against corrosion the first step in the electroplating process is also a layer of nickel. Use Simichrome to clean the finish and Flitz Wax to protect the finish from spotting.
Mink matt (.096)
The same procedure as Mink finish, but the surface is then brushed to give it a sumptuous matt look. Clean with soft soap and water and avoid rubbing the surface with anything other than a soft cloth. Lightly apply a spray on wax and avoid buffing. Pat the wax off rather than shine the surface.
Natural stones and gemstones
White turquoise (-51)
Geologically, it is one the youngest and rarest type of stone in the world, an agglomerate of strong opaque white, crossed by grey or black veins and with a matte surface finish. White turquoise is particularly prized by collectors and is classified in gemstone class 3 (class 1 includes e.g. diamond, sapphire and emerald, amber falls into class 4).
Origin: USA.
The hardness of the stone is 5 - 6 on the Mohs scale.
The stone is polished, coated with a thin protective layer to prevent discolourations, and set in metal. It is recommended that the gemstone White turquoise not come into contact with strong acids and alkalis.
Always clean with pure water and a soft cloth and make sure to keep the surface dry at all times.
Black marble (-52)
A rare stone of volcanic origin, popularly used for decoration or cladding since ancient times. In this marble, the black colour is created by mixing graphite and bitumen.
Marble is popular in bathrooms because of its colourful pattern and depth of colour. As a plus, it also has antibacterial properties.The fascination of this stone lies in its heterogeneous patterning in the form of branched veins in white and light grey.
Origin: China, Guangxi
Mohs hardness: 3.
The stone is polished, coated with a thin protective layer to prevent discolourations, and set in metal. It is recommended that Black marble not come into contact with strong acids and alkalis.
Always clean with pure water and a soft cloth and make sure to keep the surface dry at all times.
Amethyst (-53)
Amethyst is the most valuable type of quartz and is highly prized by collectors.
The gemstone fascinates with its slightly varying colouration depending on the incidence of light and an irregular surface structure.
Origin: Madagascar.
Its hardness, with a Mohs value of 7, is close to that of diamond (10).
The stone is polished, coated with a thin protective layer to prevent discolourations, and set in metal.Like other high-quality gemstones, amethyst is sensitive to strong acids and alkalis. The stone can lose its colour when exposed to elevated temperatures; at 200 °C, the amethyst’s colour will fade strongly. It is recommended that Amethyst not come into contact with strong acids and alkalis.
Always clean with pure water and a soft cloth and make sure to keep the surface dry at all times.
Malachite (-54)
A gemstone in an amazingly strong green colouring with a moiré pattern. The order in which the aggregates grow around the centre of the crystal and the width of the alternating dark and light bandings form a pattern unique to each stone. The precious stone owes its beauty to its copper content and the vagaries of geological processes. It is susceptible to cracking and must therefore be protected from sudden shocks and temperature fluctuations.
Origin: Zambia.
Mohs-scale hardness: 6.
The stone is polished, coated with a thin protective layer to prevent discolourations, and set in metal. It is recommended that Malachite not come into contact with strong acids and alkalis.
Always clean with pure water and a soft cloth and make sure to keep the surface dry at all times.
Labrodorite (-55)
This gemstone is named after the Canadian island where the first large deposit of the mineral was found. The stone is characterised by its greenish-grey colouring, its deep three-dimensional appearance and its iridescent colouring due to the double refraction of the light. This also causes the unique iridescent play of colours (Labradorescence). When looking at the stone, the rainbow seems to move with the viewer's gaze. Labradorite has a heterogeneous pattern.
Origin: Canada.
Mohs-scale hardness: 6.
The stone is polished, coated with a thin protective layer to prevent discolourations, and set in metal. It is recommended that Labrodorite not come into contact with strong acids and alkalis.
Always clean with pure water and a soft cloth and make sure to keep the surface dry at all times.
Blue Aventurine (-56)
A decorative stone presenting many colour variations from deep brown to pink. The main feature is the interspersion of golden sparkling inclusions in the mineral structure. The characteristic sparkling gold hue and shimmering lustre of aventurine are due to inclusions of mica, goethite and hematite platelets, as well as cracks filled with iron hydroxides. From the colourful palette of aventurine's colours, blue is the rarest. Aventurine blue is characterised by uniform colouring, sparkle and a homogeneous structure.
Origin: India.
Mohs-scale hardness: 6 - 7.
The stone is polished, coated with a thin protective layer to prevent discolourations, and set in metal. It is recommended that the stone Avanterune blue not come into contact with strong acids and alkalis.
Always clean with pure water and a soft cloth and make sure to keep the surface dry at all times.
Palissandro Blue (-60)
Very rare, multi-coloured marble mined only in a single quarry in Northern Italy. The stone has a pearly-grey to pearly blue surface shot through with beige-golden, graphite-grey, peach, or pink veins. The unique patterning of each marble slab is reminiscent of the crests of waves or has the shape of bands or branched veining. Inclusions of quartz and rare elements make the luxurious marble shimmer slightly under incident light.
Palissandro marble is extraordinarily resilient, resistant to external influences, and will absorb only little moisture. This makes it outstandingly suitable for use in the bathroom.
Origin: Northern Italy.
Mohs hardness: 3.
The stone is hand-cut, polished, and coated in a transparent protective layer.
Palissandro Blue should not get into contact with any strong acids or alkalis. Always clean it with pure water and a soft rag.
Green aventurine (-57)
Green aventurine is a natural gemstone with a fine, consistent texture and a fascinating appearance. A soft pastel shade of eucalyptus green and fresh sage was chosen for the exquisite pieces from Jörger Design.
This stone belongs to the family of fine-grained quartzites and is characterised by its numerous natural inclusions, which give it its unique structure. Aventurine in its green colour is considered to be particularly valuable and durable. With a hardness of 7 on the Mohs scale, it is also extremely robust.
The cut of the stone is deliberately slightly rough and has a subtle, natural shine. This feature not only lends the stone authenticity, but also makes it easier to distinguish it from artificial glass imitations.
For the Valencia handles, the stone is carefully cut and polished by hand without any additional treatments. Always clean with pure water and a soft cloth and make sure to keep the surface dry at all times.
Crystals
Crystal handles
With proper care, the faceted crystals retain their shine and purity for years.
Clean the crystals with a mild detergent diluted in water. Do not use hot water as this can cloud the crystals. Gently wipe the crystals from the base of the handle with a soft cloth. Rinse the crystal handles thoroughly with lukewarm water and pat them dry with a soft cloth.
Do not use kitchen or microfiber towels, as fine dust particles can mechanically damage the crystal surface. It is strictly forbidden to use detergents for windows and mirrors.
Crystal handles
With proper care, the faceted crystals retain their shine and purity for years.
Clean the crystals with a mild detergent diluted in water. Do not use hot water as this can cloud the crystals. Gently wipe the crystals from the base of the handle with a soft cloth. Rinse the crystal handles thoroughly with lukewarm water and pat them dry with a soft cloth.
Do not use kitchen or microfiber towels, as fine dust particles can mechanically damage the crystal surface. It is strictly forbidden to use detergents for windows and mirrors.
Porcelain
Porcelain handles
The secret of perfection in every detail lies in the skilful handicraft and production of every single piece. Each decorative operating handle is moulded separately from high-quality porcelain and then glazed. The Fürstenberg porcelain manufacturer confirms the origin with the gold emblem on each handle. The relief of the porcelain handle is emphasized by hand-painted contours made of 24 carat gold or platinum.
Clean the porcelain with a mild detergent diluted in lukewarm water. Do not use kitchen or microfiber towels, as fine dust particles can mechanically damage the crystal surface. Rinse the porcelain thoroughly with water and pat dry with a soft cloth.
Surfaces and care tips by Jörger
SOLID CRAFTSMANSHIP – MADE IN GERMANY
Jörger fixtures are crafted from finest grade, special alloy brass. The brass is cast into blanks which are then formed and polished by hand. Only after many precise procedures and strict quality controls, does each piece obtain its finish in the electroplating or the paint shop. Only then we will pass the product - carefully packaged - on to you.
HIGH PERFORMANCE AND EXCLUSIVE DESIGN
Our products combine technical perfection with exclusive design. The accessories especially fitted for every Jörger design series allow you to create an individual and harmonious decor for your bathroom. For more than 100 years, we have taken pride in our careful manufacturing and finishing combined with individual design to make unique products for your bath.
LONG LASTING BEAUTY – THE RIGHT CARE
Daily, pat the fixture dry with a soft cloth after each use — this is the single most important care you can give any finish! Immediately remove any residues of personal care products with clear water. Only use detergents that are specifically intended for this area, such as neutral liquid soap or weak non-alcohol detergent-water solution. The cleaning product should be applied or sprayed onto a cloth or sponge, never directly on the surface. Dosage and duration are based on necessity and selected product; follow the manufacturer's instructions and do not mix cleaning products. Avoid all cleaning products that contain abrasive, corrosive, ammonia, acid, bleach and alcohol (for example based on hydrochloric, formic, acetic or phosphoric acid or chlorine bleaching) as well as dry dusters or sponges with an abradant coating. Cleaning products may continue to harm damaged surfaces.
APPLY PROTECTIVE COATING REGULARLY
Protect painted and galvanized surfaces (e.g. gold, platinum or chrome) by applying a thin layer of liquid wax without polishing additives – slightly sprayed, but not rubbed. The protective film promotes and preserves the surface shine. Do not use this treatment on matt finishes.
REMOVING SCALE DEPOSITS
Regular cleaning prevents calcification. Hard water deposits and dirt in aerators and showerheads can be easily removed. Gently loosen the aerator with a wrench. Tap out the sieves and then place in a vinegar bath for a few minutes. Vinegar is a mild acid which will harm the finish with prolonged contact. Rinse thoroughly in running water. Almost all showers are equipped with an anticalcareous system: deposits dissipate when wiping over the nubs. Clean showerhead sieves may also be cleaned in a mild soap and water solution. Lime scale can be removed by soaking sieves in a 10% vinegar solution at room temperature for 2-5 hours. Afterwards, rinse thoroughly in running water.
MAINTENANCE
Be sure to activate all angle and concealed gate valves every three month. Work all thermostats through the whole temperature range with taps fully opened to keep the regulating capsule in good working order. Do not dismantle the thermostat, but have the entire system checked by a professional plumber once a year.
Click here for downloading our brochure "care instructions".
SPECIAL CARE FOR EXQUISITE SURFACES
Gentle care
